From Canadian Woodworking. | View in browser 
Canadian woodworking
You asked to hear about woodworking products from Canadian Woodworking
Our annual "Hot Products" guide helps you select the best tools, machinery and accessories for your shop. 

RALI Cut disk cutting machine

The RALI Cut is the perfect tool for making successive, rapid, clean and precise cuts on wood, steel, aluminum and plastic up to 25mm/0.98″ in diameter.

WORX Nitro 20V Crown Stapler 

The WORX WX843L 2-in-1 cordless 3/8″crown stapler fires both 18-gauge 19/32″ (15mm) brad nails and T50 3/8″ crown staples with a length range of 1/4″ to 9/16″.

Laguna P|Flux Dust Collectors

The P|Flux cyclonic dust collectors with HEPA filters are among the world’s most advanced clean air shop solutions. There are 3 models to choose from.

WORX 20V 5-in-1 Sander Kit

With the WORX WX820L you get 5 sanders in one tool by simply switching sanding bases: finish­ing, random orbit, detail, finger or detail contour.

WORX Nitro 20V 1/2" Brushless Drill

The WORX WX102L Nitro brushless drill/driver is equipped with a heavy-duty, 1/2″ ratcheting metal chuck for superior bit retention.

Kneel-It V3

Kneel-It is a cleverly engi­neered support device designed to relieve strain and decrease injuries that come with pro­longed kneeling. It helps reduce knee and back pain while increasing productivity at work or around the house.

Bessey STE Series Telescopic Support Rod

 The new BESSEY STE series of telescopic support rods make it super easy to apply fast, one-handed, overhead clamping.

35-piece 1/2" Router Bit Pro Set

The Cromson # CR5137 set of 35 professional grade micro-grain carbide router bits with 1/2″ shanks contain just about every bit you need for routine shop router work.

Flexcut Carvin’ Jack 2.0

The new  Flexcut Carvin’ Jack 2.0 is  designed specifically for the needs of woodcarvers. At 4.4 ounces and a closed length of 4-1/4″, this jackknife features 6 blade profiles.

Flexcut Pocket Jack 2.0

The new  Pocket Jack 2.0 features a cross-etched, aerospace alumi­num handle, giving you greater carving control.  It weighs 3.9 ounces and has a closed length of 4-1/4″. 

Flexcut Spoon Carvin’ Jack 2.0

Flexcut’s Spoon Carvin’ Jack 2.0 makes it easy and convenient to handcraft spoons from every kind of wood stock. Our new and improved model has been redesigned for greater functionality. 

Spiral Cutterhead for DeWalt DW735  Planer

Spiral cutterheads are quieter, require less energy to operate, reduce or eliminate sanding work and don’t require sharpening. 

Viking Arm Handheld Jack

With a lifting capacity of 330 lbs the Viking Arm tool makes working alone consider­ably easier. This ingenious and built-to-last tool helps with a host of practical jobs around the home and on the jobsite. 

Laguna X|Flux 5

The all-new X|Flux 5 boasts a powerful 5hp motor that moves an impressive 1,823 CFM of air. And it does so quietly at only 69 decibels (10 feet from the unit).

Great Projects Begin with Great Materials

Pros and DIYers will find great, Canadian-made, maple-faced hardwood plywood at their favourite Home Depot location in three popular thicknesses: 1/4″, 1/2″ and 3/4″. Intended for interior use, and suitable for staining or painting.

The Ultimate Precision Joinery System

The PantoRouter woodworking machine makes woodworking joinery fast, accurate, easy-to-use, repeatable and fun! Mortise and tenon has never been easier with over 150 perfectly fitting sizes using their patented tapered templates.

Semi-PRO 2 Bottom Feed System

Whether you’re a weekend warrior or an experienced hobbyist, the lightweight and portable FUJI Semi-PRO 2 HVLP system provides the perfect combination of versatility and performance to get the job done with its powerful 1400 watt 2-stage motor.

Shaper Origin Handheld CNC Router

Shaper’s collection of tools is growing. Upgrade your workshop with Origin, Shaper’s handheld CNC router. Combine with Workstation to create beautiful and precise joinery or utilize Shaper Plate to install virtually any piece of hardware.

10" Benchtop Jointer with Helical Cutterhead

Equipped with a heli­cal cutterhead, the new King Canada KC-10HJC jointer runs quieter, reduces or eliminates sanding and leaves a smoother finish with no tear-out, especially on figured woods.

10" Cabinet Table Saw

King Canada’s new KW-10HCX has all the features you’d want in a left-tilt cabinet saw. The 1.75 HP motor is pre-wired for 120V operation and easily converted to 240V. The 44″ by 27″ precision-ground cast-iron top provides a generous 30″ rip capacity. 

Einhell 36V 8-1/4" Cordless Table Saw

With the Einhell #4340451 table saw there’s no annoying power cord to get in the way. And, at under 29 pounds it’s truly portable – perfect for job site work or for use in a workshop with limited floor space.

Einhell 18V 1/2" Cordless Hammer Drill/Driver

The Einhell #4513937 hammer drill/driver is the right tool for drilling concrete, brick, stone and other masonry materials with speed and ease. It  delivers a maximum torque of 390 inch/pounds with a 24,000 BPM impact rate.

Einhell 18V Cordless Reciprocating Saw

With its brushless motor the Einhell #4326311 gives you all the power you need to cut through studs, conduit, metal, PVC and nails. It has a 1-1/8″ stroke length and cutting speed range of 0 to 2,500 RPM. 

Einhell 18V 1/4" Cordless Impact Driver

Due in part to a brushless motor design, the Einhell #4510045 impact driver delivers an impressive 1,594 inch/pounds of torque with speeds from 0 to 2,900 RPM. All in a package that weighs in at only 2.35 pounds.

Einhell 18V Cordless Wet/Dry Vacuum

Keep your shop clean and collect dust at source with the Einhell #2347137 5.3 gal (20 litre) wet/dry vacuum. It delivers 53 CFM of suction power and 33″ of water lift at a 72 decibel level. The stainless steel tank has 4 castors for excellent mobility. 

Einhell 18V 7-1/4" Cordless Circular Saw

The lightweight (7.1 lb.) construc­tion of the Einhell #4331211 circ saw offers reduced fatigue and ease of use, while the brushless motor delivers more power for prolonged operation. It delivers a 2-1/2″ cut­ting depth at 90° and 1-3/4″ at 45°. 

Build Your Dreams

Canadian Woodworking & Home Improvement magazine is committed to helping you become a better woodworker by providing the information you need to enhance your skills and acquire the right equipment to tool your shop – so that you can build your dreams.

This email was sent to . If it was forwarded to you, please sign up with your own email address.
Inspiring Media Inc. o/a Canadian Woodworking & Home Improvement
PO Box 808, Niagara on the Lake, ON L0S 1J0 Canada